If you encounter issues, refer to the following common solutions: :
Move the PP 2 away from other equipment (like power transformers) to reduce interference. Nad Phono Preamp Pp2 Manual
Check if the . If not, verify the power supply connections. Ensure the correct input is selected on your amplifier. Hum or Buzz : If you encounter issues, refer to the following
The PP 2 utilizes high-quality components and a 24V power supply for enhanced musical dynamics and stability. Moving Magnet (MM) Moving Coil (MC) Gain at 1kHz Input Sensitivity 3.5mV (ref. 200mV output) 0.2mV (ref. 200mV output) Signal-to-Noise Ratio 80dB (A-weighted) 78dB (A-weighted) RIAA Accuracy ±0.3dBplus or minus 0.3 d cap B ±0.3dBplus or minus 0.3 d cap B THD (20Hz - 20kHz) Source: NAD PP-2 Specifications . 3. Troubleshooting Ensure the correct input is selected on your amplifier
: Ensure all equipment is turned off and the PP 2 is disconnected from its power supply. Connect Turntable :
: Check that all RCA plugs are fully inserted into their respective sockets on both the PP 2 and the amplifier.
